7
1. Set Up Your System
Setting up your Arlo Go camera involves a few simple steps. Your Arlo account lets you
view videos from any Internet-connected computer or mobile device. You can use the
same Arlo app to set up and manage Arlo Go and Arlo cameras.
What You Need to Install and Use Your Arlo Go
Camera
You need the following to activate your Arlo Go camera:
• A computer or mobile device with Internet access
• An activated AT&T SIM card with a data plan
A SIM card comes pre-installed in every Arlo Go camera, but you must contact
AT&T to activate it. Keep your Arlo Go retail box with you when you contact
AT&T. The label on the bottom of the box has information that AT&T needs to
activate your SIM card. For more information about activating your SIM card,
see
Activate Your SIM Card on page 8.
• If you are using a computer, you also need a supported web browser. The
following browsers are qualified to work with the Arlo web application:
• Internet Explorer 10 or higher
• Microsoft Edge
• Firefox 3.5 or higher
• Safari 3 or higher (only with Mac OS X)
• Chrome (latest version)
• If you are using a mobile device, you need the Arlo app, which requires iOS
8 or higher or Android 4.1 or higher. To download the mobile app for your
smartphone or tablet, you can do one of the following:
• Visit your device’s app store and search for Arlo.
• If you have a QR reader installed on your device, scan this QR code to be
directed to the app in the app store on your device.
During activation, your Arlo Go camera must be in a location with AT&T data
coverage.
To Next Page
Loading...
Need help?
General
