Arlo Go - Turn SD Card Recording Off and On

24
Use an SD Card With Arlo Go
The camera settings display.
4. In the Storage section, tap or click SD Card.
The SD Card Status shows whether the SD card is ready, needs to be formatted,
or is full.
Turn SD Card Recording O and On
¾ To turn SD card recording o and on:
1. Insert the SD card into the SD slot on the Arlo Go camera.
For more information, see
Insert an SD Card on page 23.
2. Tap the Arlo icon
on your mobile device.
If you are using a computer, enter
arlo.netgear.com in the address bar of a
browser.
The Devices page displays.
3. Tap or click Settings > My Devices.
A list of cameras displays.
4. Tap or click the camera.
The camera settings display.
5. Select Local Storage > SD Card.
The SD Card page displays.
6. Tap or click SD Card Reording.
SD card recording toggles o and on. If the slider is all the way to the right
against a green background, SD card recording is enabled. If the slider is all the
way to the left against a white background, SD card recording is disabled.
2424