Operation
Turning Power On and Off
Press power on the remote control to turn the DCX set-top on or off (standby). Be sure the
remote control is in cable mode by pressing cable before pressing power.
Changing Channels
You can change channels in three ways:
• Press channel + or – on the remote control to step through the channel selection.
• Enter the number of the channel you wish to view using the number keys on the remote
control.
• Select the channel in the Interactive Program Guide.
Adjusting the Volume
Press volume + or – on the remote control to adjust the volume. When you adjust the volume,
the volume scale is displayed on the screen. Press mute on the remote control to toggle the
sound on and off.
Interactive Program Guide
The Interactive Program Guide displays information about TV programs and enables you to
access features such as Parental Control or Pay-Per-View. Interactive program guides can vary
with each cable service provider. Refer to the Interactive Program Guide’s instruction manual for
detailed instructions.
All-Digital, High-Definition Set-top DCX525 • User Guide 4
© ARRIS Enterprises, Inc. 2015 All rights reserved. 365-095-25821 x.2
To Next Page
Loading...
