Arris DCX525 - Configuring User Settings; Getting Started with User Settings; User Settings Menu Navigation

To Next Page

To Previous Page

Configuring the User Settings

Getting Started

The following describes how to configure the audio (for HDMI connections), SD and HD video

settings, and closed caption settings for the DCX525.

Before you adjust the output settings:

1. Connect the DCX525 to the TV and other home entertainment devices.

2. Plug the DCX525 into an AC power outlet.

3. Initialize the DCX525 and authorize it for services.

4. Turn the TV on.

When using an HDMI connection between the DCX525 and the television, be sure to have the

cable connected and the TV powered on before adjusting the video settings. ARRIS recommends

certified standard (category 1) HDMI cables for 1080i or 720p resolutions. A certified high speed

(category 2) HDMI cable is recommended for resolutions of 1080p.

Configuring the User Settings Menu Screen

To configure the DCX525 settings on the User Settings menu screen, power off the DCX set-top

and then press the menu key on the remote control. If your TV is on, the on-screen User

Settings menu lists the DCX525 settings that can be adjusted.

Figure 7: User Settings Menu—No HDMI Connection

All-Digital, High-Definition Set-top DCX525 • User Guide 14

Other manuals for Arris DCX525