Chapter 6: Using the Data Gateway
1. Reset button
2. Ethernet (1 - 4)
3. Cable
4. Power
Resetting the Router to Factory Defaults
To reset the router to factory defaults, press and hold the Reset button (1) on the back of
the Data Gateway for more than fifteen seconds. This restores the wireless setup
configuration and router configuration parameters to the factory defaults. You may need to
do this if a misconfiguration has locked out all access.
Release 16 STANDARD 1.3 March 2015 Touchstone DG1680 Data Gateway User Guide 33
To Next Page
Loading...
