TM508/TM512 Installation Guide Release 5 Standard 1.2 Mar 2007
v
Contents
About this Document vii
Safety Requirements vii
Radio Frequency Emissions and Immunity viii
Product Safety ix
CE Compliance ix
Planning the Installation 1
Environmental Requirements 1
Site Location 1
Power Requirements 2
AC Powering 2
DC Powering 2
Telephony Requirements 4
Network Requirements 4
Telephony Modem Accessories 5
Punch-Block Kit 5
Battery Backup Power Supply 6
Installing the Telephony Modem 7
Cable and Connector Pinouts 8
Telephone Connector Pinouts 8
Telemetry Block Pinouts 8
Procedure: Inspecting and Unpacking the Telephony Modem 10
Action 10
Procedure: Rack-Mounting the Chassis 12
Action 12
Procedure: Wall-Mounting the Chassis 13
Using the Mounting Holes 14
Using the Rack-Mounting Brackets 14
Procedure: Installing the Punch-Block Kit 15
Mounting the Punch-Down Block 16
Connecting Subscriber Wiring 17
Procedure: Connecting Cables 18
Action 19
Procedure: Installing the Battery Backup Power Supply 21
Mounting the Power Supply 22
To Next Page
Loading...
