Artec Studuino - Page 14

10
④
Drag
from the Control Palette and use it to enclose your program in the
Script Field.
⑤
Set the bottom
to OFF.
Now you’ve programmed your LED to blink every second indenitely.
Use a USB cable to connect your Studuino to your PC. Now choose Transfer from the Run
menu to transfer your program. The LED will blink once every second once the transfer nishes.
①
Turn on LED Repeat forever
②
Wait one second
③
Turn o󰀨 LED
④
Wait one second
Drag and drop
①
Make sure the block
encloses the whole
program
Click
▼
①
Choose o󰀨
②