3
②
Connecting DC Motors
Up to two DC Motors can be connected using connectors M1 and M2.
★
DC Motor connectors can only connect one way.
③
Connecting Servomotors
Up to eight Servomotors can be connected to the Servomotor connectors.
The gray wires of your Servomotor cables
should face towards the center of the board.
★
DC Motor connector M1 can't be used at the same time as Servomotor connectors D2 and D4.
★
DC Motor connector M2 can't be used at the same time as Servomotor connectors D7 and D8.
M1
M2
Gray
Black
Black
D9
D10
D11
D12
D2
D4
D7
D8
To Next Page
Loading...
