15
Basic Operation
English
Basic Operation
Select the language of menus and messages displayed on the
screen.
Select the signal input to the monitor, display it on the screen.
■ Switching the input signal when
using 1 screen
■ Switching the input signal when
using 2 screens or 3 screens
● When RGB/YPBPR was selected, if the color is abnormal,
set it correctly with “Input Config” on the main menu.
(page 23)
● The “Input Select” menu will disappear after 5 seconds if
no operation is performed.
Selecting Display Language
1
Press [MENU].
The main menu is displayed.
2
Press [w/q] to select “System Config”,
and then press [e/r].
3
Press [w/q] to select “Language”, and
then press [e/r] to select language.
Switches the language to display menus and messages
on the screen.
Selectable languages are as follows.
● English
● Deutsch
● Français
● 日本語
● Italiano
● Español
4
Press [MENU] twice.
The main menu is closed.
Input Config
Video Config
System Config
Function
Window Config
Remote
Control
Exit
Select
PC
VIDEO
Auto
RGB-VIDEO
RGB-PC
Auto
Auto
S
VIDEO
RGB/YP
B
P
R
Sync. Select (RGB)
Sync. Select (HD15)
HD15
Auto
USER1
3Sec
Data Save
Status Display
Last
English
Power On Setup
Language
Return
Select
Change
Input Config
Video Config
System Config
Function
Window Config
Remote
Control
Menu Position
USER1
3Sec
Data Save
Status Display
Last
English
Power On Setup
Return
Select
Change
Input Config
Video Config
System Config
Function
Window Config
Remote
Control
Menu Position
Language
Switching Input Signal
1
Press [INPUT].
The “Input Select” menu is displayed.
2
Press [w/q] to select input.
Switches to the selected input.
3
Press [INPUT].
The “Input Select” menu is closed.
1
Press [INPUT].
The “Input Select” menu is displayed.
2
Press [W.SEL] to select the screen that you
want to switch the input signal.
3
Press [w/q] to select input.
Switches to the selected input.
4
Press [INPUT].
The “Input Select” menu is closed.
INPUT
HD15
RGB/YP
B
P
R
S VIDEO
VIDEO
DVI-D 1
DVI-D 2
Input Select
Exit Select
SDI
EJ-MLA26_EN_Arthrex.book Page 15 Wednesday, August 8, 2012 11:58 AM
To Next Page
Loading...
General