18
Display with 2 Screens, 3 Screens — Continued
● The subscreen 2 may have picture quality different from
the main screen and the subscreen 1 depending on the
input signal.
When using the subscreen 2, we recommend the
following settings.
Images with many still pictures: Set the “3D I/P” to “On”.
Images with many moving pictures: Set the “3D I/P” to
“Off”.
See “3D I/P” on page 26 for details.
● Images on the subscreen 2 might rarely be distorted
depending on the input signal.
4
Press [w/q] to select “Window Mode”,
and then press [e/r] to select mode
(display position, size).
In accordance with the multiple windows selected with
procedure 3, select subscreen display position and
display size for the respective mode.
● When “2PIP” is selected in procedure 3
(A: Main screen, B: Subscreen)
Mode1:Displays subscreen at
top right.
Mode2:Displays subscreen at
bottom right.
Mode3:Displays subscreen at
bottom left.
Mode4:Displays subscreen at
top left.
● When “3PIP” is selected in procedure 3
(A: Main screen, B: Subscreen 1, C: Subscreen 2)
Mode1:Displays subscreen 1, 2
at right.
Mode2:Displays subscreen 1, 2
at left.
● When “2POP” is selected in procedure 3
(A: Main screen, B: Subscreen)
Mode1:Subscreen is displayed
at 1/2 display size.
Mode2:Subscreen is displayed
at 1/3 display size.
Mode3: Subscreen is displayed
at 1/4 display size.
Multi Window 2PIP
Mode1
Normal
Normal
Display Direction
Scan Size
Return Select Change
Input Config
Video Config
System Config
Function
Window Config
Remote
Control
Window Mode
A
B
A
B
A
B
A
B
A
B
C
A
B
C
A
B
A
B
A
B
● When “3POP” is selected in procedure 3
(A: Main screen, B: Subscreen 1, C: Subscreen 2)
Mode1:Subscreen 1, 2 display
at 1/2 display size.
Mode2:Subscreen 1, 2 display
at 1/3 display size.
Mode3:Subscreen 1, 2 display
at 1/4 display size.
5
Press [MENU] twice.
The main menu is closed.
A
B
C
A
B
C
A
B
C
EJ-MLA26_EN_Arthrex.book Page 18 Wednesday, August 8, 2012 11:58 AM
To Next Page
Loading...
General