24
Input Configuration — Continued
■ H Position
To move screen left and right.
❑ Adjustment Range
0 (left) to 100 (right)
■ V Position
To move screen up and down.
❑ Adjustment Range
0 (down) to 100 (up)
■ Dot Clock
When a striped pattern is displayed, adjust so that noise
will decrease when the synchronous striped pattern (noise)
is produced.
❑ Adjustment Range
0 to 100
■ Clock Phase
When inputting RGB signals and PC signals, adjust for ease
of viewing when bleeding and blurring of the screen
contour occurs.
❑ Adjustment Range
0 to 31
■ Signal Format
Sets signal type for unidentifiable signals.
See *3 on page 31 for details.
❑ Selectable Value
4:3, Wide
EJ-MLA26_EN_Arthrex.book Page 24 Wednesday, August 8, 2012 11:58 AM
To Next Page
Loading...
General