This shows all of the input sources that can be included in the selected mix. You can select
individual sources by clicking on a number, or select stereo sources by clicking one of the
buttons that contains two numbers. As each button is clicked a channel will be added or
removed to the Channel display in the Monitoring Mix section, which remains visible in the
background.
Note that input sources that are not included in the mix will not be heard in the mix.
Channel display access slider
When a large number of input sources are added to the mix a slider appears along the
bottom of the Monitoring Mix window, allowing you to access the input sources that have
been pushed out of view.
Another method is to resize the AFCC window by click/dragging the triangle in the lower
right corner. This will allow you to see all of the channels in the Monitoring Mix at the same
time, depending on the number of included channels and the size of your monitor.
Copy Mix
The selected mix might be a good starting point for constructing one of the other mixes.
This feature lets you copy one mix to another, after which you can make any needed
adjustments to levels, inputs, etc. Here's the process:
1. Select the source Mix (Main, Cue Mix 1, Cue Mix 2). For this example we’ll select
the Main Mix.
2. Click the Copy Mix button
3. Select the destination Mix by clicking its tab (Cue Mix 1 or Cue Mix 2).
4. After the selection has been confirmed, the source Mix will be copied onto the
destination Mix.
Grouping Tracks
This function lets you create and select different Track Groups within the selected mix, so
you can adjust them all with a single action. Grouped tracks can be muted or soloed with a
single click, for example, or you can adjust their levels by moving a single control.
There are four color-coded groups available for each mix. When a channel is added to a
group, the name field under that channel's fader is highlighted with that same color.
To select a Track Group, click one of the four buttons. Once a group is selected you can
adjust its settings as described above, or you can edit the group or clear it.
Edit the Track Group
Follow these steps to assign or remove individual channels from a Track Group.
Arturia - User Manual AudioFuse Studio - AudioFuse Control Center 57
To Next Page
Loading...