Arturia MiniLab Mk II User Manual

3.2.2. Analog Lab Lite preset selection
There are two ways to select Analog Lab Lite presets with MiniLab MkII:
3.2.2.1. Encoders 1 and 9
For rapid scrolling through the Analog Lab Lite Preset list, simply turn encoder 1. When you
see the preset you want, click the encoder to select it.
To narrow down the list of presets, use encoder 9 to scroll to one of the preset filter
characteristics and click the encoder. You can enable as many filters as you like. The
remaining choices will be displayed in the Results list in the middle of the Editor window.
Tap pad 14 to clear the preset filter selections.
3.2.2.2. Pads 15 and 16
If it is not already lit, press the Pad 1-8 / 9-16 button to access pads 9-16. Pad 15 will select
the previous preset, and pad 16 will select the next preset.
Encoders 1 + 9 in Analog
Lab Lite
Pads 14-16 have dedicated functions in Analog Lab Lite
Arturia - User Manual MiniLab MkII - MiniLab MkII and Analog Lab Lite 11

Arturia MiniLab Mk II Specifications

General

Brand	Arturia
Model	MiniLab Mk II
Category	Controller
Language	English