Arturia MiniLab Mk II User Manual

4.4. Store To/Recall From
4.4.1. The ‘Store To’ button
The left-hand section of the MIDI Control Center has a button called “Store To”. It is used to
transmit a Template from the Template Browser window to the MiniLab MkII.
If there is a particular Template you would like to transmit to your MiniLab MkII, select it in
the Template Browser window.

The following process will overwrite the internal memory of the MiniLab MkII. If you are not sure
those settings have been backed up, be sure to archive them to your computer using the Recall From
button.
The process is simple:
• Select the desired Template in the Local Templates window
• Select the destination Memory in the Device Memories window
• Click the Store To button.
In the example above, Clicking Store To will store the Template into the MiniLab MkII as
preset memory 2.
24 Arturia - User Manual MiniLab MkII - MIDI Control Center

Arturia MiniLab Mk II Specifications

General

Brand	Arturia
Model	MiniLab Mk II
Category	Controller
Language	English