4.7. Working with Device Settings
All of the Global parameters have pull-down menus with additional options. To select a new
value, click the arrow next to the parameter you would like to change.
The options of each field are different for each parameter, so we’ll cover each one
separately. You may want to try each setting to see which one fits your needs the best.
4.7.1. Keyboard Channel
This is where the master MIDI channel for the MiniLab MkII is chosen in the MCC. Available
values are 1-16. The one with the blue check mark is the current value.
This parameter will affect any control that has its MIDI channel value set to Keyboard. We
will discuss this in MIDI Channel settings section [p.31].
Note: You can also select the Keyboard MIDI Channel from the front panel of the MiniLab MkII.
Simply press the Shift button and press one of the numbered keys.
4.7.2. Knob acceleration
It is possible to specify how many turns of a knob it will takes to change a parameter value
from its minimum value to its maximum. Three settings are available:
The one with the blue check mark is the current value.
The Keyboard MIDI channel menu
The Knob Acceleration menu
Arturia - User Manual MiniLab MkII - MIDI Control Center 29
To Next Page
Loading...
Need help?
General
