4.3. Template Browser
The Template Browser shows a list of all the Templates available to you inside the MCC.
These are divided into two main groups of Templates: Factory and User.
The User Templates are the ones you have recalled from your MiniLab MkII with the MCC.
See Store to/Recall From section [p.24] to learn how to do this.
A Template contains the all of the settings for the controllers and pads. You can build a
limitless library of setups in the User Templates area.
A Template does not contain the Device Settings. We’ll show you how to save those separately in
Import/Export Device Settings section [p.26].
4.3.1. Drag and drop
It’s possible to drag a single Template from the Browser onto a Memory location. When
you do, that Template will be sent to the MiniLab MkII internal memory and overwrite that
location.
However, if you try to drag a Template onto Memory #1 you will receive an error message.
This preset is reserved for use with Analog Lab Lite and cannot be overwritten.
4.3.2. Revise a Template
The contents of an archived Template can be edited whether the MiniLab MkII and the MCC
are connected or not. Simply select the Template in the Template Browser and its data will
appear in the MCC Editor window, ready for editing.
Note: When an edit is made an asterisk will appear next to the name of the source Template. This
means you need to use the Save or Save As… buttons to preserve your new data.
Arturia - User Manual MiniLab MkII - MIDI Control Center 23
To Next Page
Loading...
Need help?
General
