4. MIDI CONTROL CENTER
4.1. The Basics
The MIDI Control Center is an application that allows you to configure the MIDI settings of
your MiniLab MkII. It works with most of Arturia’s devices, so if you have an earlier version
of the software you’ll want to download the MiniLab MkII version. It will work with the other
Arturia products as well.
4.1.1. System requirements
PC: 2 GB RAM; CPU 2 GHz (Windows 7 or higher)
Mac: 22 GB RAM; CPU 2 GHz (OS X 10.7 or higher)
4.1.2. Installation and location
After downloading the appropriate MIDI Control Center installer for your computer from the
Arturia website, double-click on the file. Then all you have to do is start the installer and
follow the instructions. The process should be trouble-free.
The installer puts MIDI Control Center with the other Arturia applications you have. In
Windows, check the Start menu. On an OS X Macintosh computer you’ll find it inside the
Applications/Arturia folder.
4.1.3. Connection
Connect MiniLab MkII to your computer using the included USB cable. It’ll be ready to go
almost instantly.
Now launch the MIDI Control Center. MiniLab MkII will be in the list of connected devices:
20 Arturia - User Manual MiniLab MkII - MIDI Control Center
To Next Page
Loading...
Need help?
General
