Need help?Do you have a question about the Aruba S2500 and is the answer not in the manual?
General| Input Voltage | 100-240 VAC |
|---|---|
| Form Factor | Rack-mountable |
| Uplink Ports | 4 x SFP |
| Power Supply | Internal |
| Operating Temperature | 0°C to 40°C |
| Operating Humidity | 10% to 90% non-condensing |
Details chapters covering hardware overview, installation, and specifications of the S2500.
Lists ArubaOS User Guide and CLI Reference Guide for complete management.
Provides contact information for support, including website, forums, and email addresses.
Lists all items included in the package for the Aruba S2500, including hardware and documentation.
Details the components and LEDs found on the front panel of the Aruba S2500 series switches.
Explains the 24 or 48 Gigabit Ethernet ports, their pin-out, and associated LINK/ACT and Status LEDs.
Details the function and indicators of the LINK/ACT and Status LEDs for each 10/100/1000 Ethernet port.
Describes the three main LEDs (Power, Status, Stack) on the front panel for overall device monitoring.
Explains the LCD panel's functionality, navigation buttons, and its four operational modes (Boot, LED, Status, Maintenance).
Describes the four 10GBASE-X uplink ports, their use as uplinks or stacking ports, and their LED indicators.
Details the function and indicators of the LINK/ACT and Status LEDs for the 10GBASE-X uplink ports.
Details the components found on the rear panel, including management, console, USB, and power connectors.
Describes the 10/100/1000BASE-T Gigabit Management port for CLI, SNMP, and Web interface access.
Explains the Mini USB console port for direct local access and the required driver installation.
Details the serial console port for direct local management via RS-232 serial cable.
Describes the USB 2.0 interface for saving and uploading configurations via a USB storage device.
Explains the functions of the SHUTDOWN LED, indicating system halt or critical temperature events.
Details the integrated AC power supply options (150W and 580W) and their specifications.
Explains Power over Ethernet (PoE) support, management modes (Dynamic, Static, Class-based), and PoE priority.
Introduces hot-swappable SFP/SFP+ modules for Gigabit Ethernet transceivers and lists supported models.
Describes Direct Attach Cables (DACs) for stacking S2500 units and lists available DAC types.
Lists critical safety precautions and warnings to follow during installation to prevent damage or injury.
Provides guidelines for choosing an appropriate environment for the S2500, considering power, ventilation, and interference.
Details the process for mounting the S2500 in a standard 19-inch telco rack using the included kit.
Explains how to mount the S2500 in a 19-inch telco rack from the middle of the device using an optional kit.
Describes how to mount the S2500 to a wall using an optional accessory kit.
Details the process for placing the S2500 on a table or shelf using the included rubber feet.
Provides instructions on how to connect the AC power cord to power on the S2500 device.
Guides users through the process of installing an SFP module into the S2500's 1000Base-X port.
Explains how to properly remove an SFP module from the S2500 by releasing its latch.
Provides instructions for cleaning and connecting LC fiber optic cables to SFP-SX or SFP-LX modules.
Details the procedure for installing a Direct Attach Cable (DAC) into a 10GBASE-X port for stacking.
Explains how to safely remove a Direct Attach Cable (DAC) from the S2500 port.
Lists physical dimensions, device weight, power specifications, operating, and storage environmental requirements.
Provides information on country-specific restrictions, safety, and regulatory compliance for Aruba products.
Details FCC Class A compliance for the US and Class A limits for Canada regarding radio noise emissions.
Contains warnings and instructions regarding battery replacement, handling of perchlorate material, and disposal.
Explains the WEEE directive for separate collection and treatment of Aruba products at end of life.
States compliance with EU RoHS Directive restricting hazardous substances in electronic equipment.
Confirms compliance with China environmental declaration requirements and the EFUP 50 label.
To Next Page
