Aruba S2500 - Specifications, Safety, and Compliance; S2500 Specifications; Safety and Regulatory Compliance

Aruba S2500 Series Mobility Access Switch | Installation Guide Specifications, Safety, and Compliance | 31
Chapter 3
Specifications, Safety, and
Compliance
S2500 Specifications
Physical
 Device Dimensions (without mounting brackets) (HxWxD)
 All Models: 1.75” x 17.5” x 12”
 All Models: 4.4 cm x 44.2 cm x 30.5 cm
 Device Weight:
 S2500-24P: 12.1 lbs. (5.5 Kg)
 S2500-48P: 13.3 lbs. (6.2 Kg)
 S2500-24T: 10.1 lbs. (4.54 Kg)
 S2500-48T: 10.9 lbs. (4.96 Kg)
Power Specifications (AC Input Requirements)
 580W Integrated Power Supply (PoE Only)
 AC Input Voltage: 115 VAC to 230 VAC
 AC Input Current: 6.3A
 AC Input Frequency: 47-63 Hz
 150W Integrated Power Supply (Non-PoE Only)
 AC Input Voltage: 100 VAC to 240VAC
 AC Input Current: 2.5A
 AC Input Frequency: 50/60 Hz
Operating Specifications
 Operating Temperature Range: 0°C to 40°C (32°F to 104°F)
 Operating Humidity Range: 5% to 95% (RH), non-condensing
Storage Specifications
 Storage Temperature Range: 0°C to 50°C (32°F to 122°F)
 Storage Humidity Range: 5% - 95% (RH), non-condensing
Safety and Regulatory Compliance
Aruba Networks provides a multi-language document that contains country-specific restrictions and
additional safety and regulatory information for all Aruba products. This document can be viewed or
downloaded from the following location:
www.arubanetworks.com/safety_addendum
!
CAUTION
Aruba wired access points must be installed by a professional installer. The professional installer is responsible for
ensuring that grounding is available and it meets applicable local and national electrical codes.