What to do if ASCOM Racks & Stands status LED is flashing red (100 ms on, 800 ms off) for more than 3s?
If the ASCOM Racks & Stands status LED is flashing red (100 ms on, 800 ms off) for more than 3 seconds, remove the handset from the charger. Please note that not all handsets support easy replacement; refer to the handset's documentation for specific details.
Why is the status LED on my ASCOM Racks & Stands flashing red then green?
If the status LED on your ASCOM Racks & Stands charger is flashing red for 3 seconds, then turns green, a factory reset has been performed. You may need to set parameters using WinPDM/Device Manager.
What to do if the status LED on ASCOM Racks & Stands charger is fixed red?
If the status LED on the ASCOM Racks & Stands charger is fixed red, this indicates a software error. The suggested solution is to send the charging rack for service.
General| Material | Steel |
|---|---|
| Color | Black |
| Adjustable Shelves | Yes |
| Wheeled | Yes |
| Type | Rack |
| Weight Capacity | 150 kg |
| Height | 1800 mm |
| Width | 600 mm |
To Next Page