TD 92679EN
22 November 2013 / Ver. G
Installation Guide
Elise3
12
4. Installation and Configuration
1 Fasten the big assembly bracket on the right side of the Elise3 and the small
assembly brackets on the left side, as shown in the figure below.
2 Fasten the assembly brackets in the rack as shown in the figure below (screws not
included).
Front mounted double
Front mounting of double
Elise3 requires the standard 19” rack kit.
1 Use the supplied assembly brackets and fasten the two
Elise3 together, both on the
rear side and on the bottom side, as shown in the figures below.
To Next Page
Loading...
