TD 93066EN
User Manual
Ascom Myco Smartphone
2. Quick Installation Steps for Administrators
9
14 May 2018 / Ver. K
Figure 3. Instructions for sharing code by using NFC.
If needed, follow the steps in 2.2.1 Install Using Easy Deployment on page 7 to add a
messaging number to the handset after installation.
2.2.3 Manual Installation
If neither QR codes, nor Easy Deployment is available, the handset can be manually installed
through the admin settings menu. Refer to the installation chapter of the Configuration Manual,
Ascom Myco Smartphone.
NOTE: Quick setup by scanning a bar code does not automatically provide the
handset with a DECT subscription. Before the handset can be used in DECT
environment, the administrator must do one of the following:
• Manually subscribe the handset to the DECT system and log in
to an extension manually
• Enable the DECT Easy Registration feature for automatic DECT
subscription and login.
To Next Page
Loading...
