EasyManua.ls Logo

ASCOM Myco 2 - Automatic Call after Alarm

ASCOM Myco 2
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TD 93066EN
User Manual
Ascom Myco Smartphone
10. Personal Alarm
68
14 May 2018 / Ver. K
Press the Volume button (up, or down).
10.3 Automatic Call after Alarm
A handset can be configured to call a predefined number after an alarm has been sent.
Depending on the configuration, the call can be established in the following modes:
Normal mode - The call is established as an ordinary call.
Loudspeaker mode - Loudspeaker mode is used by default during the call.
Monitor mode - A one-way "hidden" call where the called party can listen in but cannot
communicate with the calling handset.
Refer to the Configuration Manual, Ascom Myco Smartphone for instructions on how to
configure the automatic call after alarm.
NOTE: If the handset is locked with a PIN, or password, it needs to be unlocked
before the alarm can be cancelled.

Table of Contents

Other manuals for ASCOM Myco 2

Related product manuals