TD 93066EN
User Manual
Ascom Myco Smartphone
1. Introduction
1
14 May 2018 / Ver. K
1. Introduction
The Ascom Myco Smartphone is a durable and robust handset, purpose built for nurses,
caregivers and clinicians. Alerts from patient monitors, and communication from staff and
patients, are available to you at all times, wherever you are on-site. With the top display, color
coded LED priority beacon and touchscreen you have the ability to quickly respond to alerts.
This document describes features and functionality for the following handset versions of the
Ascom Myco Smartphone:
• Ascom Myco 2 Wi-Fi and DECT (GMS or non-GMS)
•Ascom Myco 2 Wi-Fi and Cellular (GMS or non-GMS)
•Ascom Myco Wi-Fi
• Ascom Myco Wi-Fi and Cellular
Read Appendix A. Safety Precautions on page 101 before using the handset.
For a list of:
• Abbreviations and glossary used in the manual, see 1.3 Abbreviations and Glossary User
Manual on page 3.
• Handset features, see 1.4 Features on page 4.
Target Group
This document is targeted at personnel responsible for handling the administration and
distribution of handsets at the end customer site.
It is also intended for the end user, or anyone interested in acquiring deeper knowledge about
the handset.
Prerequisites
Before the handset can be used, an administrator must do the following:
1 If the Cellular handset version is used, insert a micro-SIM card from a mobile network
operator into the handset. Refer to 2.1 Insert SIM Card on page 6.
2 Register the handset in the PBX for voice, in the applicable Unite module(s) for messaging,
and the optional central management (Easy deployment) for setup and configuration of
handsets. Refer to the Configuration Manual, Ascom Myco Smartphone.
3 If the handset is used in a DECT system, subscribe the handset to a DECT base station and
log in to an extension number.
4 Read the safety precautions in Appendix A. Safety Precautions on page 101.
How to Use This Document
This document describes the features and settings of the Ascom Myco Smartphone. It is
referred to as the "handset" in the manual, and especially marked with "Ascom Myco 2 only",
"GMS version only", "Wi-Fi only", "DECT only", or "Cellular only", whenever the functionality
differs between handset versions.
All assigned locations and alerts in this document are according to default programmed
versions, but additional functions, and factory settings are also included to cover additional
functionality.
The images can differ, depending on the software version.
NOTE: The Ascom Myco Smartphone is referred to as the handset in this manual.
To Next Page
Loading...
