TD 93066EN
User Manual
Ascom Myco Smartphone
4. Basics
15
14 May 2018 / Ver. K
Turn the Handset Off
1 Long press the Power button.
2Tap Power Off.
4.2 Wake and Unlock the Handset, or Lock and Put It to Sleep
The handset automatically turns to sleep after 1 minute (default), to save battery time. If the
screen lock functionality is enabled (default) the handset is locked automatically when entering
sleep mode.
TIP: You can change the sleep timeout time, refer to 16.1.4 Sleep Timeout on page 84.
By default the Lock screen shows the current date and time, and can also be configured to
show alerts, warnings, messages, and missed calls. Refer to 11.4 Lock Screen Notifications on
page 71 for information on how to use lock screen notifications.
Wake and Unlock the Handset
To wake the handset from sleep mode, do the following:
1 Press the Power, or Home button.
2 If needed, swipe in any direction to unlock the screen.
Put to Sleep and Lock the Handset
• Press the Power button, or wait until the handset automatically turns to sleep.
TIP: When not using the handset, put it to sleep mode. This avoids unintentional display taps as
it locks the screen.
4.2.1 Screen Lock
A screen lock on the handset is used to prevent any unauthorized access. To access a
handset, with an activated screen lock, a specific action or sequence of actions needs to be
correctly performed.
Toggle Screen Lock
To select, or change, a screen lock, go to: Settings > Admin settings > Security > Screen lock.
The available screen lock options are None, Swipe, PIN and Password.
4.3 Adjust the Volume
Adjust the volume by pressing the Volume button (up, or down), or by changing the volume in
the Settings app. Refer to 16.2.1 Volumes on page 84.
NOTE: Even if the handset is locked, you can answer incoming calls, and use the
Multifunction/Alarm button. An emergency call can also be made while the
screen is locked, depending on configuration. All alerts appear in the top
display, even when the handset is in sleep mode. Refer to 7. Alerts on page
52, or 5. Calling on page 35 for details on how to handle alerts and calls.
NOTE: A PIN, or a password might be needed to unlock the handset.
NOTE: On the GMS handset versions, the screen lock is part of the Android Factory
Reset Protection (FRP). For more information, see "Prepare a GMS Handset
Version for a Factory Reset" in the Configuration Manual, Ascom Myco
Smartphone.
To Next Page
Loading...
