ASCOM Myco 2 - 11 Notifications; Sound and Vibration; Sound Pressure Levels; Color-Coded LED Signals

TD 93066EN
User Manual
Ascom Myco Smartphone
11. Notifications
69
14 May 2018 / Ver. K
11. Notifications
New messages, phone calls, alerts and status information are all indicated by notifications from
the handset.
This chapter includes the following sections:
• 11.1 Sound and Vibration on page 69
• 11.2 Color-Coded LED Signals on page 69
• 11.3 Top Display Notification on page 70
• 11.4 Lock Screen Notifications on page 71
• 11.5 Status Bar on page 72
• 11.6 Notifications on page 73
• 11.7 Notification Drawer on page 75
• 11.8 Icons Used for Notification on page 76
11.1 Sound and Vibration
Incoming alerts and messages, in addition to various status notifications, can be indicated by
sound and vibration.
11.1.1 Sound Pressure Levels
Sound pressure level range for adjustable auditory signals: 43.24 dB - 70.72 dB.
11.2 Color-Coded LED Signals
The LED priority beacon in front of the top display is used to indicate the priority level, or the
category, of incoming alerts. When a high priority alert also has a category color, the LED
alternates between red and category color flashes.
The LED is also used to indicate incoming text messages and phone calls, and to show the
battery and charging status.
In the case of a crisis alert, the LED beacon alternates between the category color and red in
the specified crisis flashing frequency (3 Hz) in the following pattern: Category color - Pause -
Red - Pause (repeat).
Medium priority alarm (1 beep) High priority alarm (siren)
Minimum 43.51 dB 43.24 dB
Maximum 70.72 dB 67.24 dB