TD 93066EN
User Manual
Ascom Myco Smartphone
3. Handset Description
11
14 May 2018 / Ver. K
3.1.1 Home Button
• Press to return to the Alert view (refer to 4.7.1 Alert View on page 19).
• Press to wake the display from sleep mode (refer to 4.2 Wake and Unlock the Handset, or
Lock and Put It to Sleep on page 15). The Power button can also be used for this
functionality.
3.1.2 Volume Button, Up and Down
• Press up to increase, or press down to decrease the speaker and loudspeaker volume
(refer to 4.3 Adjust the Volume on page 15).
• Press the volume down button repeatedly to mute notification- or call sounds (refer to 4.4
Use Vibrator Only, or Silent Mode on page 16).
To specify the default volume, refer to 16.2.1 Volumes on page 84.
3.1.3 Power Button
• Long press to turn the handset on (refer to 4.1 Turn the Handset On, or Off on page 14).
• Press to wake the display from sleep mode (refer to 4.2 Wake and Unlock the Handset, or
Lock and Put It to Sleep on page 15). The Home button can also be used for this
functionality.
• Press to put it to sleep (refer to 4.2 Wake and Unlock the Handset, or Lock and Put It to
Sleep on page 15).
• Long press to turn off the handset (refer to 4.1 Turn the Handset On, or Off on page 14).
10 Top display (3.1.8 Top Display on page 12)
11 Color-coded LED priority beacon (11.2 Color-Coded LED Signals on page 69)
12 Loudspeaker
13 Rear microphone
14 Camera/Barcode reader (13. Camera and Gallery on page 80.)
15 GSM antenna
16 Battery cover lock
17 Battery Pack
18 Clip
19 WLAN antenna, and GPS antenna
20 Color pad for clip (3.1.10 Color Pad for Clip on page 13.)
21 Back button
b
22 Overview button
c
23 Ascom IR location
d
a.This feature is system dependent.
b.Designated hardware button on Ascom Myco 2, software button at the bottom of the screen
on earlier models.
c.Designated hardware button on Ascom Myco 2, software button at the bottom of the screen on
earlier models.
d.Only available for Ascom Myco 2.