TD 93066EN
User Manual
Ascom Myco Smartphone
7. Alerts
54
14 May 2018 / Ver. K
7.2.2 LED Beacon
When the front display is in sleep mode, the color of the alert is shown by the LED beacon. The
LED beacon flashes for a while and is then turned off.
7.2.3 Lock Screen
When the front display is in sleep mode, the front display will automatically light up to show
newly received alerts on the lock screen.
Refer to 11.4 Lock Screen Notifications on page 71 for details about lock screen notification.
7.2.4 Top Bar
The top bar shows alert information, such as the icon and color of the alert.
Figure 39. Alert information shown in the top bar.
The top bar can also be used to show availability (as in the example below). To enable this,
instead of alert information, the value Login > Enable user availability status needs to be
changed to Yes in the Device Manager (default: No).
Figure 40. Availability status in the top bar.
The top bar also shows the number of pending (not yet handled) alerts, refer to 7.5 Pending
Alerts on page 58.
7.2.5 Notification
When an alert is received, it may appear on screen as a notification, refer to 11.6 Notifications
on page 73.
7.3 Prioritization of Alerts
Alerts can be prioritized, which for example controls the order of presentation in the top
display. The following priorities exist for alerts:
Crisis 1 Crisis alert
High 2 High priority alert
Medium 3 Medium priority alert
Low 4 Low priority alert
To Next Page
Loading...
