INSTALLATION GUIDE
Room Controller 4 (NIRC4-xMN) Document History
13 Document History
Version Date
Description
A 25 January
2021
First released version A
B 21 March
2022
Various text corrections made.
Packing list included in the Description, see 2 Description, page 2
Important Safety Information moved to Symbols chapter, see 1 Symbols,
page 1
Two Cautions combined into one, see4 Mounting, page 4
Pointed to spring type holding clip in graphics, see 4.1 Mount the NIRC4-
xMN base onto a backbox, page 4
Caution using a power injector updated, see 7 Enabling Auxiliary Power
Supply, page 10
Graphic updated with detailed information on how to remove a part of the
wire holding clip when using an 8-pole connector (NICT-8CA), see Figure 8.
NICT-8CA colliding with the wire holding clips, page 12 and Figure 14. NICT-
8CA colliding with the wire holding clips, page 15
Graphic added showing to remove the release liner of the double sided
tape when placing LED boards on an NIRC4, see To place the NILDx LED
board(s):, page 23.
TD 93351EN / 21 March 2022 / Ver. B
27
To Next Page
Loading...
