ASEM CPU 1021/A - Page 58

CPU 1021/A User’s Guide
50 Asem S.p.A.
No Execute Mode Mem Protection
[Enabled]: the function is enabled
[Disabled]: the function is disabled
Intel ® Virtualization Technology
[Enabled]: the function is enabled
[Disabled]: the function is disabled
MCH Control Sub-menu
GMCH Power Management Mode [Default: Legacy]
Allows “Enhanced Power Management” of the Northbridge (register
PMCFG - MCHBAR offset F10h, bit 4). This mainly concerns the power-
down of the memory in power saving states C3 and C4, and transition to
states C3 and C4 if the busmaster is active. If the C-States are not used,
leave the default setting: Legacy
C2 to C3 Transition Timer [Default: 6h]
Reserved
C3 to C4 Transition Timer [Default: 8h]
Reserved