28
Steps to set up DDNS:
1. From the navigation panel, go to Advanced > Network > WAN > DDNS.
2. Enable the DDNS Client: Yes means enable DDNS function, No means disable
DDNS function.
3. Server: Select supported DDNS service provider’s URL from the list.
4. Host Name: URL that has been registered in the specified Vendor.
5. Username or E-mail Address: Username or email address which has been
registered in the specified vendor.
6. Password or DDNS Key: Password which has been registered in the specified
vendor.
7.
Click Apply.
To Next Page
Loading...
