79
2. Username: WiFi Router’s sign in name.
3. Old Password: WiFi Router’s sign in password.
4. New Password: New password.
5. Retype New Password: Retype new password.
6. Remote Log Server: IP address of a syslog server to which log messages will be
sent in addition to the local destination.
7. Time Zone: Default time-zone is USA/Denver.
8. Auto Logout: Auto sign out after a specified time.
9. Enable WAN Down Notification: When there is no Internet access, redirect to
local notification.
10. NTP Server: WiFi Router can access a NTP (Network Time Protocol) server in order
to synchronize the time automatically.
11. Click Apply.
2.4.4.2 Configuration
To Next Page
Loading...
