48
4. WiFi Network Name: A name whose length is less than 32 characters is used to
identify a wireless network. WiFi devices automatically detect all networks within
its communication range.
5. Hide SSID: If [Yes] is selected, network name (SSID) does not show in site surveys
by wireless mobile clients and they can only connect to WiFi Router by manually
entering network name (SSID).
6. Security Setting: This field enables authentication methods for wireless clients.
7. WPA Encryption: Enable WPA Encryption to encrypt data.
8. WiFi Password: Requires a password of 8-63 characters (letters, numbers or a
combination) or 8 - 64 hex digits to start the encryption process.
9. Protected Management Frames: Protected Management Frames is a feature to
protect some types of management frames like deauthorization, disassociation
and action frames.
10. Max Clients: The maximum number of clients allowed.
11. Password Rotation Interval: This field specifies the interval (in seconds) after
which a WPA group password is changed. Enter [0] (zero) to indicate that a
periodic key-change is not required. Please input the value between 600 to 86400
(seconds).
12. Click Apply.
To Next Page
Loading...
Need help?
General
