Need help?Do you have a question about the Asko TDC44 and is the answer not in the manual?
Describes the TDC33 (air extraction) and TDC44 (condenser) tumble dryer models.
Notifies about a design change in the bottom cover fastening for machines manufactured after week 46/2000.
Electrical and plumbing installations must be performed by qualified professionals. Advise to switch off power and use an earthed wristband.
Ensure the condensation water tank is empty for transport/storage and follow local recycling guidelines for disposal.
Details principal dimensions, volume/capacity, electrical connection alternatives, materials, and hose specifications.
Explains how air circulates, heats, and how the humidity sensor detects dryness in the TDC33 model.
Describes the two air circulation systems for drying and cooling in the TDC44 condenser model.
Discusses placement options like free-standing, built-in, or in a washing tower, considering ventilation.
Covers tower configuration, foot adjustment, condensation management, air extraction, and electrical setup.
Emphasizes that all electrical connections and rewiring must be performed by a qualified tradesman.
Step-by-step guide to change the front door from left to right or right to left opening.
Addresses frequent problems like short run times, incomplete drying, and uneven results.
Details common error messages, their causes, and troubleshooting steps.
Provides details for motors, sensors, heating elements, pumps, and control units.
Lists standard tools like Torx spanners, U-ring spanners, and screwdrivers needed for servicing.
Identifies specific tools required for tasks like drum installation and felt seal replacement.
Instructions for removing/installing top cover, front panel, doors, and various housing components.
Detailed steps for removing, installing, and replacing the drum and drive belt.
Procedures for replacing the motor, capacitor, fuses, and contactors.
Guides for replacing humidity sensor, thermistor, door switch, and electronic control unit.
Instructions for removing, installing, and cleaning water tank housing and condenser.
Steps for replacing door parts like hinges, seals, handles, and the front panel.
Explains how to select programs, start, stop, and interpret display information.
Covers language selection, program locking, and child lock functions.
Basic steps for operating the dryer, loading laundry, and post-drying procedures.
Instructions for cleaning the fluff filter, condensed water tank, and condenser.
Guide to cleaning the machine's exterior, program panel, and internal fan wheel.
Advice on sorting fabrics, load sizes, and matching them to appropriate programs.
Guidance on responding to error messages and understanding display indicators.
Presents the electrical circuit diagram for detailed technical reference.
To Next Page
General
