Asko TDC44 - Changing the Microswitch for the Condensed Water Pump; Changing the Foam Rubber Seal

67
SERVICE
2
2
Changing the microswitch for the condensed
water pump
1. Remove the rear panel in accordance with the
section "Rear panel - removing...".
2. Remove the wiring and the microswitch.
3. Fit the new microswitch.
4. Install the rear panel in accordance with the
section "Rear panel - installation...".
Changing the foam rubber seal
1. Remove the rear panel in accordance with the
section "Rear panel - removing...".
2. Change the seal.
3. Install the rear panel in accordance with the
section "Rear panel - installation...".