Asko TDC44 - Changing the Front Felt Seal; Changing the Support Roller

52
SERVICE
2
2
Changing the front felt seal
1. Remove the drum in accordance with the sec-
tion "Drum - removing...".
2. Remove the seal.
3. Install the new seal evenly distributed around
the groove.
IMPORTANT
The strip seal must be pressed firmly all around
the groove. Irregular fitted strip seal can cause
unwanted noice.
4. Install the drum in accordance with the sec-
tion "Drum - installation...".
Changing the support roller
1. Remove the front frame in accordance with
the section "Front frame - removing...".
2. Unscrew the support roller.
3. Install the new support roller.
4. Install the front frame in accordance with the
section "Front frame - installation...".