73
CHANGE SETTINGS
CHANGE SETTINGS
LANGUAGE
You can change the language of the displayed text.
The languages you can choose from are Dansk,
Deutsch, English, Espanol, Français, Italiano,
Nederlands, Norsk, Portugués, Suomi and Svens-
ka.
Earlier models had two versions of the machi-
ne (Alternatives 1 and 2) but now all eleven langua-
ges are present in all machines.
Alternative 1: The languages you can choose
from are Danish, Finnish, French, Dutch, Nor-
wegian and Swedish.
Alternative 2: The languages you can choose
from are English, French, Italian, Portuguese, Spa-
nish and German.
To change language do as follows:
Switch off the power switch, , then switch it
on again so that the machine is in start-up mode.
Press the
P8
button five times, then press the
P1
button five times. You have to complete the-
se ten button presses within fifteen seconds.
Within three seconds of pressing the
P1
but-
ton for the fifth time you should then select the
language you want by pressing the
P6
or
P7
but-
tons.
LOCKING A PROGRAMME
If for some reason you want to limit the number
of programmes that can be used you can lock one
or more programmes.
No characters or digits are shown on the dis-
play when a locked programme is selected.
To lock or unlock a programme, do as fol-
lows:
Switch off the power switch, , then switch it
on again so that the machine is in start-up mode.
Press the
P8
-button five times, then press the
P7
-button five times. You have to complete the-
se ten button presses within fifteen seconds.
Within three seconds of pressing the
P7
-but-
ton for the fifth time you should hold in the pro-
gramme button for the programme you want to
lock for 5-10 seconds until the information in
the display starts flashing.
Then you can lock the programme by relea-
sing the programme button and pressing the -
button once.
Do the same to unlock the programme.
CHILD LOCK ON BUTTON
To prevent accidental button pushes on the
button you can activate the child lock function.
The button then must be held in for three
seconds to activate the machine.
To switch the child lock on or off, do as
follows:
Switch off the power switch, , then switch it
on again so that the machine is in start-up mode.
Press the
P8
button five times, then press the
P3
button five times. You have to complete the-
se ten button presses within fifteen seconds.
Within three seconds of pressing the
P3
but-
ton for the last time you must then press the
P6
or
P7
button to choose whether you want the
child lock on or off.
Press
P7
to activate the child lock.
Press
P6
to disable the child lock.
To start a program with locked
Star t
button.
Press the
Start
button for three seconds and the
machine will start.
To Next Page
Loading...
