NETWORK-SWITCH-LP01 – Configuration Guide
U-0641-3675.docx – Issue: 01 complete, approved
Page 6 of 28
2.2.2 SFP Speed
If SFPs are connected, the SFP ports must be configured with the connection speed that matches the SFP.
This is configured using DIP switches on the top of the unit. Switch A for port 9, and switch B for port 10.
• Set to ON if the SFP is 1000 Mbps.
• Set to OFF if the SFP is 100 Mbps.
To Next Page
Loading...