Under the Current run
status tab:
6. At Room temperature,
the current room temperature
is shown.
7. At Set temperature, the
temperature which the guest
has set on the thermostat
is shown.
8. At Fan control, it is shown
whether the fan control is
‘auto only’ or ‘manual’.
9. At Fan speed, the current
fan speed (low, mid, high)
is shown.
10.At Occupancy, the occupancy
status is shown.
11.At HVAC, it is shown whether
the HVAC is ‘not running’,
‘cooling’ or ‘heating’.
12.At Override mode, it is
shown whether the thermostat
parameters are overridden.
To Next Page
Loading...
Need help?
General