Asus P5M2 - Page 120

ASUS P5M2 Series
5-9
Us ing Ne w C onf igu rat ion
When a RAID set is already existing, using the New Conguration command
erases the existing RAID conguration data. If you do not want to delete the
existing RAID set, use the View/Add Conguration command to view or create
another RAID conguration.
To create a RAID set using the New Conguration option:
1. From the utility main menu, highlight
Congure, then press <Enter>.
2. Use the arrow keys to select
New Conguration, then press <Enter>.
3. Follow steps 3 to 7 of the previous section.
4. Select
Size from the Logical Drive menu, then press <Enter>.
5. Key-in the desired logical drive size, then press <Enter>.
6. Follow steps 8 to 13 of the previous section to create the RAID set.