Asus P5VDC-TVM SE - Drive a [1.44 M, 3.5 In.]; Video [EGA;VGA]; Halt on [All, but Keyboard]; Base Memory;Extended Memory;Total Memory [Xxxk]

2-8 Chapter 2: BIOS setup
2.3.5 Drive A [1.44M, 3.5 in.]
Species the capacity and physical size of diskette drive A. Do not select [None]
if you are using a oppy disk drive. Conguration options: [None] [360K, 5.25 in.]
[1.2M , 5.25 in.] [720K , 3.5 in.] [1.44M, 3.5 in.]
2.3.6 Video [EGA/VGA]
Conguration options: [EGA/VGA] [CGA 40] [CGA 80] [MONO]
2.3.7 Halt On [All, But Keyboard]
Sets the system to halt on errors according to the system functions specied in
each option. Conguration options: [All Errors] [No Errors] [All, But Keyboard] [All,
But Diskette] [All, But Disk/Key]
2.3.8 Base Memory/Extended Memory/Total Memory [xxxK]
Shows the size of installed memory. These items are not congurable.
Head
Shows the number of the hard disk read/write heads. This item is not congurable.
Precomp
This item is not congurable.
Landing Zone
Shows the number of landing zone per track. This item is not congurable.
Sector
Shows the number of sectors per track. This item is not congurable.
After entering the IDE hard disk drive information into BIOS, use a disk utility,
such as FDISK, to partition and format new IDE hard disk drives. This is
necessary so that you can write or read data from the hard disk. Make sure to
set the partition of the Primary IDE hard disk drives to active.