Asus P5VDC-TVM SE - Integrated Peripherals Management

2-14 Chapter 2: BIOS setup
2.6 Integrated Peripherals
The Integrated Peripherals menu items allow you to change the onboard devices
conguration settings.
IDE Primary/Secondary Master/Slave PIO [Auto]
This option lets you set a PIO (Programmed Input/Output) mode for the IDE
device. Modes 0 through 4 provide successive increase in performance.
Conguration options: [Auto] [Mode 0] [Mode 1] [Mode 2] [Mode 3] [Mode 4]
IDE Primary/Secondary Master/Slave UDMA [Disabled]
Ultra DMA capability allows improved transfer speeds and data integrity for
compatible IDE devices. Set to [Disabled] to suppress Ultra DMA capability.
Conguration options: [Disabled] [Auto]
Phoenix - AwardBIOS CMOS Setup Utility
Integrated Peripherals
Select Menu
Item Specic Help
Onchip IDE Device
setup menu.
: Move Enter:Select +/-/PU/PD:Value F10:Save&Exit ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F9: Optimized Defaults
Onchip IDE Device [Press Enter]
Onboard Device [Press Enter]
Super IO Device [Press Enter]
2.6.1 OnChip IDE Device [Press Enter]
Phoenix - AwardBIOS CMOS Setup Utility
Onchip IDE Device
Select Menu
Item Specic Help
Set a PIO mode for the
IDE device. Mode0
through 4 successive
increase in
performance.
: Move Enter:Select +/-/PU/PD:Value F10:Save&Exit ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F9: Optimized Defaults
IDE Primary Master PIO [Auto]
IDE Primary Slave PIO [Auto]
IDE Secondary Master PIO [Auto]
IDE Secondary Slave PIO [Auto]
IDE Primary Master UDMA [Disabled]
IDE Primary Slave UDMA [Disabled]
IDE Secondary Master UDMA [Disabled]
IDE Secondary Slave UDMA [Disabled]
SATA Mode [IDE]