Asus P5VDC-TVM SE - Power on by Mouse [Disabled]; Power on by Keyboard [Disabled]; State after Power Failure [Off]

ASUS P5VDC-TVM SE 2-19
2.7.11 Power On By Mouse [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 mouse to turn on
the system. This feature requires an ATX power supply that provides at least 1A on
the +5VSB lead. Conguration options: [Disabled] [Enabled]
2.7.12 Power On By Keyboard [Disabled]
Allows you to use specic keys on the keyboard to turn on the system. This
feature requires an ATX power supply that provides at least 1A on the +5VSB lead.
Conguration options: [Disabled] [Space Bar] [Ctrl-Esc] [Power Key]
2.7.13 State After Power Failure [Off]
Allows you to set whether or not to reboot the system after power interruptions.
[Off] leaves your system off while [On] reboots the system. [Former-Sts] sets the
system back to the state it was before the power interruption.
Conguration options: [Off] [On] [Former-Sts]