EasyManua.ls Logo

Asus P5VDC-TVM SE - Off by Power Button [Instant-Off]; Resume by PCI PME [Disabled]; Resume by Ring [Disabled]; Resume by USB (S3) [Enabled]

Asus P5VDC-TVM SE
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2-18 Chapter 2: BIOS setup
2.7.3 Off by Power Button [Instant-Off]
When set to [Instant-Off], the system goes to soft-off when you press the power
button for less than 4 seconds. When set to [Delay 4 Sec], press the power button
for more than 4 seconds to power off the system. Conguration options: [Delay 4
Sec] [Instant-Off]
2.7.4 Resume by PCI PME [Disabled]
This item is not congurable.
2.7.5 Resume by Ring [Disabled]
Conguration options: [Disabled] [Enabled]
2.7.6 Resume by USB (S3) [Enabled]
Conguration options: [Disabled] [Enabled]
2.7.7 Resume by PCI-E Device [Disabled]
Conguration options: [Disabled] [Enabled]
2.7.8 Resume by Alarm [Disabled]
Allows you to enable or disable RTC to generate an event. When this item is
enabled, you can set the date and time of alarm using the two following items.
Conguration options: [Disabled] [Enabled]
2.7.9 Day (of Month) Alarm [0]
To set the day of alarm, highlight this item and press <Enter> to display a pop-up
menu. Key in a value (Min=0, Max=31), then press <Enter>. Selecting [0] means
the alarm will set off everyday.
2.7.10 Time (hh:mm:ss) Alarm [0 : 0 : 0]
To set the time of alarm:
1. Highlight this item and press <Enter> to display a pop-up menu for the hour
eld.
2. Key-in a value (Min=0, Max=23), then press <Enter>.
3. Press tab to move to the minutes eld, then press <Enter>.
4. Key-in a minute value (Min=0, Max=59), then press <Enter>.
5. Press tab to move to the seconds eld, then press <Enter>.
6. Key-in a value (Min=0, Max=59), then press <Enter>.
The following items become congurable only when the Resume by Alarm item
is set to [Enabled].

Table of Contents

Related product manuals