Asus TS100-E10-PI4 - Onboard LEDs

ASUS TS100-E10-PI4
3-7
6. PCH_MFG1setting(3-pinPCH_MFG1)
This jumper allows you to update the BIOS ME block.
3.3 Onboard LEDs
1. StandbyPowerLED(SBPWR1)
The motherboard comes with a standby power LED. The green LED lights up to
indicate that the system is ON, in sleep mode, or in soft-off mode. This is a reminder
that you should shut down the system and unplug the power cable before removing or
plugging in any motherboard component. The illustration below shows the location of
the onboard LED.