Asus Z97M-PLUS - Serial Port Configuration; Parallel Port Configuration

ASUS Z97M-PLUS
3-41
Chapter 3
Intel LAN Controller [Enabled]
This item allows you to enable or disable the Intel LAN controller. Conguration options:
[Disabled] [Enabled]
The following item appears only when you set the Intel LAN Controller item to [Enabled].
Intel LAN PXE Option ROM [Disabled]
Allows you to enable or disable the PXE OptionRom of the Intel LAN controller. Conguration
options: [Enabled] [Disabled]
Charging USB devices in Power State S5 [Disabled]
[Enabled] Charges USB devices even when the system is in Power State S5. State
S5 is the soft-off mode or shutdown state where your computer has no
memory state and is not doing any computing tasks.
[Disabled] Disables this function.
Serial Port Configuration
The sub-items in this menu allow you to set the serial port conguration.
This item functions only if there is a serial port (COM) connector on the motherboard.
Serial Port [Enabled]
Allows you to enable or disable the serial port (COM). Conguration options: [Enabled]
[Disabled]
Change Settings [IO=3F8h; IRQ=4]
Allows you to select the Serial Port base address. Conguration options: [IO=3F8h;
IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3]
Parallel Port Configuration
The sub-items in this menu allow you to set the parallel port conguration.
Parallel Port [On]
Allows you to enable or disable the parallel port (LPT/LPTE). Conguration options:
[On] [Off]
The following items appear only when you set the Parallel Port item to [On].
Change Settings [Auto]
Allows you to select an optimal setting for Super I/O devices. Conguration
options: [Auto] [IO=378h; IRQ=5;] [IO=378h; IRQ=5,6,7,9,10,11,12;] [IO=278h;
IRQ=5,6,7,9,10,11,12;] [IO=3BCh; IRQ=5,6,7,9,10,11,12;]
Device Mode [STD Printe Mode]
Allows you to select the Printer Port mode. Conguration options: [STD Printer Mode]
[SPP Mode] [EPP-1.9 and SPP Mode] [EPP-1.7 and SPP Mode] [ECP Mode] [ECP
and EPP 1.9 Mode] [ECP and EPP 1.7 Mode]