AT&T DLP73410 - Call Handling

97
Smart call blocker
About Smart call blocker
Call handling
f Smart call blocker is set to on, and to allow all incoming calls by default.
WhenSmartcallblockerison,therstringofallincomingcallswillbemuted.
f If your directory, allow list, star name list and block list are empty when
Smart call blocker is on, and you have set to screen calls, the telephone will
screen all incoming home calls and asks callers to announce their names or
press the pound key (#).
f IfSmartcallblockeriso,allincominghomeandcellcallsring,including
numbers saved in the block list.
f If QUIET mode is on, and Smart call blocker is on and in screening mode, all
screenedhomecallswillbesenttotheansweringsystemaerscreening.
Smart call blocker handles calls in the following ways:
Call category Call handling /
Set prole options
Welcome calls
f Numbers saved in
allow list.
f Numbers saved in
directory.
f Numbers not found in
block list.
f Caller ID names saved
in star name list.
f The telephone rings when
there is an incoming home
call with number saved in your
allow list or directory, but not
in your block list. Robocalls
with caller names saved in
your star name list will also
ring.
f All incoming calls on your cell
line will get through and ring.
Unwelcome
calls
f Numbers saved in
block list.
The telephone does not ring when
there is an incoming call with
number saved in your block list,
and the call will be rejected.