AT&T DLP73410 - Add a Headset

25
Bluetooth
Bluetooth setup
If you have trouble pairing your cell phone, it may not be compatible with
your DLP73210/DLP73410/DLP73440/DLP73450/DLP73510/DLP73540.
Check the Bluetooth compatibility list at
https://telephones.att.com/bluetooth.
Notes:
f The pairing process may take up to one minute. If the pairing process fails, try again.
f The steps for the pairing process may vary for dierent cell phones. If this happens, follow the prompts on your cell
phone and your DLP73210/DLP73410/DLP73440/DLP73450/DLP73510/DLP73540 to complete the
pairing process.
f Refer to the user’s manual of your cell phone on how to search for or add a new Bluetooth device.
Add a headset
Before you begin, make sure that your Bluetooth enabled headset is not
connected to any other Bluetooth device. Refer to your headset user’s manual
to learn how to search for or add new Bluetooth devices.
To pair and connect a headset:
1. Press MENU/SELECT on the telephone base in idle mode to enter the main menu.
2. Press qCID or pDIR to highlight Bluetooth, then press MENU/SELECT.
3. Press qCID or pDIR to highlight Add headset, then press MENU/SELECT.
The screen displays The screen displays Please wait... followed by Search
headset.
f If there are already 2 paired devices on the list, the telephone prompts
you to select a device slot. If you select a slot, the telephone displays
Disconnect Cell Phone X? (Cell Phone X represents the device name of
your cell phone) If you press MENU/SELECTtoconrm,thecurrentpaired
device will be automatically removed, regardless of whether the pairing of
the new device is successful or not.
f If there is another headset already active, the screen will show Disconnect
Headset Y? (Headset Y represents the device name of your paired
headset) If you press MENU/SELECTtoconrm,thecurrentpairedheadset
will be automatically removed, regardless of whether the pairing of the
new device is successful or not.
4. Set your headset to discoverable mode (refer to the user’s manual of
your headset). The screen displays Adding Headset Y when the base is
connecting to your headset (Headset Y represents the device name of your
Bluetooth headset).