AT&T DLP73410 - Intercom; Initiate an Intercom Call

64
Multiple handset use
Intercom
Use the intercom feature for conversations between two devices.
You can buy additional expansion handsets (AT&T model DLP70110, sold
separately) and cordless headsets for this telephone system. You can register
uptovehandsetsorcordlessheadsetstothetelephonebase.
Initiate an intercom call
Using the cordless handset:
1. Press MENU/SELECT on the handset in idle mode.
2. Press CID or DIR to highlight Intercom, then press
MENU/SELECT .
3. Press CID or DIR to select a device. The handset shows
Calling HS X or Calling Base (X represents the handset
number). The destination handset rings and shows HS X is
calling.
To answer an intercom call with the cordless handset:
f Press HOME/FLASH, CELL or /SPEAKER on the
handset . Both devices now show Intercom.
To end an intercom call with the cordless handset:
f Press OFF/CANCEL or place the handset back in the
telephone base or charger.
Calling HS X
ECO
10:30
PM
11/20
Intercom
ECO
10:30
PM
11/20
Intercom
ECO
Handset 1
ECO