AT&T DLP73410 - Clear Voicemail Indicator; Indication; Key Tone

38
Telephone settings
Handset settings
Clear voicemail indicator/indication
Use this feature when the telephone indicates there is new voicemail but there
is none. For example, when you have accessed your voicemail while away from
home.ThisfeatureonlyturnsothedisplayedNew voicemail and the icon;
it does not delete your voicemail messages. As long as you have new voicemail
messages, your telephone service provider continues to send the signal to turn
on the indicator.
To manually turn o the new voicemail indicator:
1. Press MENU/SELECT in idle mode.
2. Press CID or DIR to highlight Settings, then press
MENU/SELECT.
3. Press CID or DIR to highlight Clr voicemail, then press
MENU/SELECTtoturnthevoicemailindicatoro.
Notes:
f Your telephone service provider voicemail might alert you to new messages with a stutter (broken) dial tone. Contact
your telephone service provider for more details.
f For information about using your voicemail service, contact your telephone service provider.
Key tone
The handset is set to beep with each key press. You can adjust the key tone
volumeorturnito.
Ifyouturnothekeytone,therearenobeepswhenyoupresskeys.
To set the key tone:
1. Press MENU/SELECT in idle mode.
2. Press CID or DIR to highlight Settings, then press
MENU/SELECT.
3. Press CID or DIR to highlight Key tone, then press
MENU/SELECT.
4. Press CID or DIR to select On or O.
5. Press MENU/SELECTtoconrm.
Clr voicemail
ECO
Key tone
ECO
Off
ECO